Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY OF PRODUCT
Using with the Carbon Filter
Fig. 17
10.1
Using with the Carbon Filter
24
Installing Air Discharge Connection
n
Connect one end of the air discharge pipe directly to the air
discharge area.
n
Mount the other end of the air discharge pipe on the air dis-
charge on the appliance.
n
Insulate the connection locations as applicable.
Assembly of Sheet Metal Fuels
If there are protective sheets on the flues, remove them
n
(Fig. 17).
n
By pulling the upper flue upwards and screw to the flue con-
nection plate through the left and the right sides.(Fig. 17).
n
Mount the lower flue to the body through the left and the right
sides.(Fig. 17).
If you used your hood without carbon filter before,
you need to remove the inner flue and outer flue
and the flue connection part of the device to use
with carbon filter.
ENGLISH
06.03.2023
Publicité
