ASSEMBLY OF PRODUCT
10
ASSEMBLY OF PRODUCT
Checking the Wall
Fig. 13
Fig. 14
22
n
It is important that the wall is straight, upright and has sufficient
load-bearing capacity.
n
It is necessary that the depth of the drill holes corresponds to
the length of the bolt.
n
It is possible to use the mounting accessories, bolts and
dowels included in the product for brick walls. In case of other
constructions (e.g. plaster, board, porous concrete), it is neces-
sary to use appropriate dowels and fixing bolts.
DANGER!
Before drilling, ensure that there are no power, gas
or water pipes in the close proximity of the drilling
locations.
1 - 3.5x9.5 Screw
2 - Flue Connection Plate
In the installation accessory 2 chimney connection plates must be
installed with 4 screws 3.5x9.5.()
1 - M5x35 Screw
2 - Hanger Plate
Install 2 hanger plates in the mounting accessory with 2 screws
M5x35 ()
ENGLISH
06.03.2023