Samsung NK30CB600W Serie Manuel D'installation Et D'utilisation page 17

WARNING
Be sure to use an outlet with a ground terminal for safety. This can prevent the
risk of electric shock, fire, or malfunction. If the outlet does not have a ground
terminal, purchase a separate grounding wire and connect it to the grounding
line.
CAUTION
Do not ground on gas pipes, water pipes, telephone lines, etc.
NOTE
Be sure to install a short-circuit breaker where there is a risk of a short circuit.
DG68-01416C-02_IB(FULL)_NK30CB600W12AA.indb 17 DG68-01416C-02_IB(FULL)_NK30CB600W12AA.indb 17
19. When the lower duct cover assembly
is complete, reassemble the filter in
the reverse order of disassembly.
NOTE
To install the extension kit, follow same
process.
Connect the filter support cable
1. Remove the filter at the bottom of
the hood. Pass the filter support
cable through the wire loop attached
on the top of the filter. Make the
knot by passing the hook of the filter
support cable through the other end
of the filter support cable.
2. Hang the hook of the filter support
cable to the anchor at bottom of the
hood. Assemble the filter.
English 17 English 17
2023-05-30 오전 10:54:25 2023-05-30 오전 10:54:25