Publicité
Les langues disponibles
Les langues disponibles
Terminal
box cover
Terminal
box
DG68-01416C-02_IB(FULL)_NK30CB600W12AA.indb 15
DG68-01416C-02_IB(FULL)_NK30CB600W12AA.indb 15
14-1.
Disconnect power circuit
breaker.
14-2.
Remove terminal box cover.
14-3.
Remove the strain relief hole
cover in the terminal box and
install a UL/CSA approved strain
relief.
E
F
A
B
C
D
A.
UL listed wire nuts
B.
Green (or bare) wire connected to
green/yellow wires
C.
White wires
D.
Black wires
E.
Home power supply cable
F.
UL/CSA approved strain relief
14-4.
Run home power supply wiring
through strain relief into
terminal box.
14-5.
Use UL listed wire nuts and
connect white wires (C) together.
14-6.
Use UL listed wire nuts and
connect black wires (D) together.
Connect green (or bare) ground
14-7.
wire from home power supply
to the green/yellow ground wire
(B) in terminal box using UL
listed wire nuts.
14-8.
Tighten strain relief screw.
14-9.
Put the wires into the terminal
box and install terminal box
cover.
14-10.
Reconnect power circuit breaker.
English 15
English 15
2023-05-30 오전 10:54:25
2023-05-30 오전 10:54:25
Publicité
