Bosch GWS18V-10 Consignes D'utilisation/De Sécurité page 2

The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
!
Safety Symbols . . . . . . . . . . . . . . . . . . . . . . .2
General Power Tool Safety Warnings . . . . . . .3
Safety Rules for Cordless Angle Grinders . . . .5
Additional Safety Warnings . . . . . . . . . . . . . .8
Intended Use . . . . . . . . . . . . . . . . . . . . . . . . .9
Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Getting to Know Your Angle Grinder. . . . . . .12
Specifications . . . . . . . . . . . . . . . . . . . . . . .14
Applications. . . . . . . . . . . . . . . . . . . . . . . . .15
Functional Descriptions . . . . . . . . . . . . . . . .16
Kickback Control . . . . . . . . . . . . . . . . . .16
Automatic Restart Protection . . . . . . . . .16
Overload Protection . . . . . . . . . . . . . . . .16
Drop Control . . . . . . . . . . . . . . . . . . . . .16
Brake Operation. . . . . . . . . . . . . . . . . . . . . .16
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Wheel Guard Installation . . . . . . . . . . . .17
Vibration Control Side Handle . . . . . . . .18
Hand Shield (sold separately). . . . . . . . .18
Quick-Clamping Nut . . . . . . . . . . . . . . . .18
Lock Nut and Backing Flange . . . . . . . . .19
Disc Grinding Wheel Assembly . . . . . . . .19
Safety Symbols
This is the safety alert symbol. It is used to alert you to potential per-
sonal injury hazards. Obey all safety messages that follow this symbol
to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Table of Contents
Abrasive TYPE 41/1A and 27A/42
Wheel Assembly . . . . . . . . . . . . . . . .20
Type 1 Abrasive Straight Grinding
Wheels . . . . . . . . . . . . . . . . . . . . . . .20
Sanding Accessories Assembly . . . . . . . .21
Type E (Diamond Surface Grinding
Wheel Guard) with Concrete Dust
Extraction Attachment for
Surfacing Grinding Assembly. . . . . . .22
Masonry Cutting Guard Assembly . . . . . .23
Inserting and Releasing Battery Pack . . .25
Operating Instructions . . . . . . . . . . . . . . . . .26
Slide Switch with LockON . . . . . . . . . . .26
Paddle Switch . . . . . . . . . . . . . . . . . . . .26
Grinding . . . . . . . . . . . . . . . . . . . . . . . . .27
Cutting . . . . . . . . . . . . . . . . . . . . . . . . . .28
Sanding Operations . . . . . . . . . . . . . . . .30
Wire Brush Operations . . . . . . . . . . . . . .31
Maintenance . . . . . . . . . . . . . . . . . . . . . . . .32
Service . . . . . . . . . . . . . . . . . . . . . . . . . .32
Batteries. . . . . . . . . . . . . . . . . . . . . . . . .32
Tool Lubrication . . . . . . . . . . . . . . . . . . .32
Motors . . . . . . . . . . . . . . . . . . . . . . . . . .32
-2-