Sunny SF-RB4850 Instructions D'assemblage page 16

ADJUSTMENT GUIDE
ADJUSTING THE LEVEL
If the recumbent bike is not level, turn the dials on
the Rear End Caps (No. 32L/R) to adjust. Turn
counter-clockwise to raise and turn clockwise to
lower.
ADJUSTING THE SEAT
To move the Seat (No. 38) forward or backward,
while seated on the recumbent bike, put your feet on
the floor. Shift the Adjustment Handle (No. 8) down
to loosen. Move the Seat (No. 38). Shift the
Adjustment Handle (No. 8) up to secure.
MOVING THE RECUMBENT BIKE
There are wheels located on the Front Stabilizer
(No. 5). Hold the handlebar on the Rear Stabilizer
(No. 6) and pull forward to lift the rear of the
recumbent bike off the floor. Now you can move the
recumbent bike.
15