Sunny SF-RB4850 Instructions D'assemblage page 12

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
ASSEMBLY INSTRUCTIONS
STEP 1:
Remove 2 Shipping Tubes (No. A), 8 Screws
(No. 20), 8 Spring Washers (No. 12) and 8
Flat Washers (No. 11) from the Main Frame
(No. 1) using Allen Wrench (No. 97).
NOTE: You may discard Shipping Tubes (No.
A) or save them to repackage the item in the
future.
Attach the Front Stabilizer (No. 5) and Rear
Stabilizer (No. 6) to the Main Frame (No. 1)
with 8 Screws (No. 20), 8 Spring Washers
(No. 12) and 8 Flat Washers (No. 11) that
were just removed. Tighten and secure with
the Allen Wrench (No. 97).
Attach the Adjustable Pad (No. 15) to the
Main Frame (No. 1).
STEP 2:
Align the Left Pedal (No. 37L) with Left Crank
(No. 23L) at 90° and gently insert the pedal
into the crank arm. Turn the Left Pedal (No.
37L) counter-clockwise as tightly as you can
with your hands, then use Spanner (No. 105)
to tighten securely.
Align the Right Pedal (No. 37R) with Right
Crank (No. 23R) at 90° and gently insert the
pedal into the crank arm. Turn the Right Pedal
(No. 37R) clockwise as tightly as you can with
your hands, then use Spanner (No. 105) to
tighten securely.
NOTE: Left Pedal (No. 37L) is marked with "L"
on the pedal, while Right Pedal (No. 37R) is
marked with "R" on the pedal. Attaching the
Pedals (No. 37L/R) to the wrong Cranks (No.
23L/R) or turning them with the wrong direction
will damage the Cranks (No. 23L/R).
11