Sunny SF-RB4850 Instructions D'assemblage page 14

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 5:
Remove 4 Screws (No. 10), 4 Spring
Washers (No. 12) and 4 Flat Washers (No.
11) from the Rail (No. 13) with Allen Wrench
(No. 97). Then attach the Rail (No. 13) to the
Main Frame (No. 1) with 4 Screws (No.10), 4
Spring Washers (No. 12) and 4 Flat Washers
(No. 11) that were just removed using Allen
Wrench (No. 97).
Remove the 2 Allen Screws (No. 51) from the
Adjustment Handle (No. 8) using Allen
Wrench (No. 96). Then attach the Adjustment
Handle (No. 8) to the Axle (No. 52) with 2
Allen Screws (No. 51) that were just removed
using Allen Wrench (No. 96).
Remove 2 Carriage Bolts (No. 9), 2 Flat
Washers (No. 11) and 2 Cap Nuts (No. 14)
from the Handlebar (No. 4) using Spanner
(No. 95). Then attach the Handlebar (No. 4) to
the Seat Tube (No. 3) with 2 Carriage Bolts
(No. 9), 2 Flat Washers (No. 11) and 2 Cap
Nuts (No. 14) that were just removed using
Spanner (No. 95).
Connect the Pulse Wire (No. 43) with the
Extension Wire 1 (No. 44).
13