Publicité
Les langues disponibles
Les langues disponibles
Location of the radiant surface elements and controls
The radiant control knobs operate the radiant surface elements on the cooktop as shown below.
1
3
Hot surface indicator
Cooking areas
•
The cooking areas on your range are identifi ed by permanent circles on the glass cooking
surface. For the most effi cient cooking, fi t the pan size to the element size.
•
Pans should not extend more than ½" to 1" beyond the cooking area.
When a control is turned on, a glow can be seen through the glass cooking surface. The
•
element will cycle on and off to maintain the preset heat setting, even at high settings.
•
For more information on selecting proper types of cookware, refer to the section "Using the
proper cookware" on page 14.
5
2
4
6
•
Comes on when the unit is turned on or hot to the touch.
•
Stays on even after the unit is turned off.
•
Glows until the unit is cooled to approximately 150°F.
1. Single element: Left rear
2. Single element: Right rear
. Dual element: Left front
. Dual element: Right front
5. Warming center: Center rear
. Hot surface indicator
Surface cooking _11
Publicité
