Publicité
SETTING THE CURRENT TIME
Note:
Timer operation is possible only when you set the current time and day of the week.
An extended power outage (30 minutes or longer) will cancel the time setting. If this happens, reset it.
1
Press the
button to display the time.
The time will start to blink slowly.
2
Press the
button.
The time will start to blink rapidly.
3
Press the
Hold down either button to quickly increase or decrease the number
settings.
4
Press the
button.
The time has now been set.
5
Press the
button to set the day of the week
6
Press the
button.
The number indicating the day of the week starts to blink.
7
Press the
d1: MON; d2: TUE; d3: WED; d4: THU; d5: FRI; d6: SAT; d7: SUN
8
Press the
button.
The day of the week has now been set.
After about 10 seconds, the indicator will alternately display current water
temperature and the time.
All manuals and user guides at all-guides.com
(ONLY WHEN CONNECTED TO A FULL-TIME POWER SUPPLY)
buttons to set the time.
buttons to set the day of the week.
– 9 –
Publicité
