Publicité
Setting the operation mode and time for the 1st setting
4
Press the
button.
"d.1" is now set and " – – " blinks.
5
Press the
ON : Standard operation
EC : ECO mode operation
OF : OFF
– – : No timer operation (operation mode continues)
6
Press the
button.
The day of the week is set and the time starts to blink.
7
Press the
(The time can be set in 10-minute increments.)
8
Press the
button.
The 1st setting has now been made and the 2nd operation mode is
displayed.
Setting the operation mode and time for the 2nd setting
9
Press the
ON : Standard operation
EC : ECO mode operation
OF : OFF
– – : No timer operation
10
Press the
button.
The operation mode is now set and the time starts to blink.
11
Press the
(The time can be set in 10-minute increments.)
12
Press the
button.
The 2nd setting is now made and the
After about 10 seconds, the indicator will alternately display current
water temperature and the time.
Note: When the time for the 2nd setting is set ahead of the 1st setting, the 1st
setting will be given priority and the 2nd setting will be cancelled.
All manuals and user guides at all-guides.com
buttons to set the operation mode.
buttons to change the time.
buttons to set the operation mode.
buttons to change the time.
indicator lights.
– 13 –
Publicité
