Télécharger Imprimer la page

KitchenAid KGCS105GSS Instructions D'utilisation page 7

Publicité

Les langues disponibles

Les langues disponibles

If cooktop does
not operate:
Check that the circuit breaker is not
tripped or the house fuse blown.
Check that the power supply cord is
plugged into the outlet.
Check that gas valves are turned to
the "ON" position.
See Use and Care Guide for
troubleshooting list.
If you need
assistance:
If you have questions about operating,
cleaning or maintaining your cooktop:
Refer to Use and Care Guide.
Call the Consumer Assistance
Center. Check your Use and Care
Guide for the number to call or call
the dealer from whom you
purchased this appliance. The dealer
is listed in the Yellow Pages of your
phone directory under "Appliances —
Household — Major — Service and
Repair."
If you need
service:
Maintain the quality built into your
cooktop by calling an authorized
service company.
To obtain the name and number of the
authorized service company:
Contact the dealer from whom you
purchased your cooktop; or
Look in the Yellow Pages of your
telephone directory under
"Appliances — Household —
Major — Service and Repair;" or
Call the Consumer Assistance
Center. The number is listed in your
Use and Care Guide.
When you call, you will need:
The cooktop model number.
The cooktop serial number.
Both numbers are listed on the
model/serial rating plate located on the
underside of cooktop burner box.
Cleaning and
maintenance
If removing the cooktop is necessary for
cleaning or maintenance, shut off gas
supply. Disconnect the gas and electric
supply. Remove the mounting brackets on
the right and left side of burner box. After
disconnecting the gas and electric supply,
finish removing the unit for cleaning and
servicing. Reinstall in reverse order and
check gas connection for leaks.
7

Publicité

loading