Télécharger Imprimer la page

Texas Equipment RMX 500 Manuel D'utilisation page 81

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 175
Important: Inspect the blade screws when turning the blades over. Since the rotations of
the blades cut into the screw, it is necessary to change the screws simultaneously with the
blades.
Use only original blades. See Section 24" Accessories"
22. Winter storage
• When cutting the grass for the last time of the year, the cutting height should not be set
to lower than 40 mm. If the grass is cut lower, the grassroot system weakens and it can
cause yellow spots.
• When storing the robot lawn mower during winter, it is recommended that the robot and
charging station are taken inside and kept dry and warm and to turn off the main switch
(OFF) to protect the battery. Charge the battery in the robot lawn mower fully in the
charging station before the robot is taken inside for the winter storage.
• The robot lawn mower's battery is a maintenance-free lithium battery, with an estimated
lifetime of up to 3-5 years, depending on the use, surroundings and winter
maintenance. The battery must not be exposed to frost!
It is recommended that the charging station is also taken inside in winter. The boundary
wire should NOT be taken up!
• It is important to charge the robot lawn mower 1-2 times during winter storage (at least
every 3 months) to ensure the health of the battery. Take the robot lawn mower and put
it in the charging station and fully charge it for 2-3 hours (can be done indoor). Then
take the robot out of the charging station again and leave it in a dry and warm room.
If these winter charges are not followed, there will be a risk of the battery losing
capacity or collapsing completely (not covered by warranty).
• Check that all bolts, screws and nuts are tightened properly, as it ensures the best
working conditions for the robot. Replace worn and broken spare parts.
Preparations for spring
After winter storage, it is a good idea to clean the charging connectors at the charging
station and charging plates on the robot lawn mower with a stiff brush. It will improve the
power connection when charging.
81

Publicité

loading

Ce manuel est également adapté pour:

Rmx 800Rmx 1600Rmx 2000