Texas Equipment RMX 500 Manuel D'utilisation page 48

3. Safety regulations
WARNING: Read all safety warnings and instructions.
When working with the robot mower, safety instructions should be strictly followed. Read
the instructions carefully before starting your machine. Make sure you can stop the
machine immediately in the event of an accident. Failure to follow warnings and safety
instructions can contribute to electric shock, fire and serious personal injury.
The warnings, precautions and instructions described in this instruction manual cannot
cover all conditions or situations that may arise. The user must therefore apply common
sense and exercise caution when using the machine.
Security
• Read the instructions carefully and be sure that you as a consumer understand all
instructions.
• Do not allow people who are not familiar with the use of the robotic mower, nor
children, to operate it.
• The operator of the machine is responsible for other persons in the work area and their
belongings.
Using the machine
• Make sure the boundary wire is mounted as directed in the manual.
• Regularly inspect the area where the machine will be used and remove all stones,
sticks and other debris that could damage the robotic mower.
• Check the blades and screws every 2 months: Check if the knifes are worn or
damaged and if the screws are intact (the blades slowly cut into the screws and will
eventually destroy them). Replace worn or damaged blades and screws if necessary,
to maintain balance. The blades can be turned over so that they can be used 2 times.
Always replace all screws and knives simultaneously! It is recommended to change
them every year.
• The machine must not be used for other use, than the use described in the instructions.
• Only use genuine accessories and spare parts. Installation of unapproved parts may
lead to increased risk and is therefore not legal. All liability is excluded in the event of
an accident or other damage caused by the installation of non-original parts
• Do not use force when using the tool. Use the right tool for the job.
WARNING SYMBOLS AT CHARGING STATION
SMPS (Switch mode power supply)
Double insulated.
SMPS (Switch mode power supply) with a short circuit-proof safety
insulating power supply.
48