Texas Equipment RMX 500 Manuel D'utilisation page 76

18. Functions of the robot
Basic principles of operation of the robot lawn mower
The robot lawn mower works in what seems to be a randomly pattern. In fact, the working
pattern is defined by advanced software, to cover the cutting area in the best way within
the scheduled working time. After a week of lawn mowing, it will have covered the entire
lawn area within the boundary wire if the working time matches the size of the lawn.
Returning to the charging station
When the battery is discharged, the robot lawn mower will go towards the boundary wire
and then automatically following it (without mowing) counterclockwise back to the charging
station. Here it will fully charge and continue its cutting cycle.
Boundary wire recognition
As the robotic lawn mower approaches the boundary wire, the sensors installed in the front
of the cover will sense it. But to ensure the best cutting result, the robot will drive beyond
the boundary wire with the front by about 10-12 cm (does not cut here). This is important
to keep in mind when you put down the boundary wire along the garden.
76