Texas Equipment RMX 500 Manuel D'utilisation page 69

14. Installing App
The robot is an IOT (internet of things) device. To take advantage of all features and keep
its software up to date, the associated App must be downloaded, and the robot connected
to a smart phone via Wi-Fi 2.4 GHz or Bluetooth 4.0.
Download the app
Download the free robot app "robotic-mower connect" first. It can be used for
iPhone (with iOS 11 or higher) or Android phones (version 4.4.2 or higher).
You can also scan the QR code below with your mobile phone's camera and bring you to a
website (the camera shows a link, press this), then press the "Install" button on the
website that appears. It will bring you to the correct App in the App Store and Google Play
respectively:
15. Preparation before connecting to robot
1. Make sure you have:
• Your Wi-Fi network name and password
• The robot lawn mower serial number (S/N), which can be found on the sticker on the
back of the machine. You can also scan the serial number's QR code with your mobile
phone's camera. The QR code is placed on the rear label (the most left QR code).
2. Check your Wi-Fi settings
• The robotic lawn mower only works with 2.4 GHz.
• Make sure your robot and your phone are on the same Wi-Fi frequency (2.4 GHz).
(Many home networks have both a 2.4 GHz and 5 Ghz frequency)
• Make sure the distance between your mower, phone and router is as close as possible
during the connection (within 10m should be OK in most cases).
69