Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Action
Wash mask components with
warm water and a mild
detergent.
When washing mask parts
(except for mask cushion and
forehead cushion), clean
thoroughly with a cloth or a
soft brush.
Wash headgear by hand.
3. Rinse all parts with clear water.
Material damage due to abrasion!
Rubbing the mask cushion and forehead
cushion can damage the coating.
Do not rub the mask cushion and
forehead cushion dry.
4. Allow all parts to air-dry.
5. Perform a visual inspection.
6. Replace damaged parts if necessary.
7. Assembling the mask
Assembling the mask",
Discolorations of mask components do
not impair the functionality of the mask.
5.2 Tips
•
You can wash all parts (except the
headgear) in a dishwasher at 65 °C.
•
Do not dry parts in direct sunlight.
•
Wash headgear before first use, as the
color may run.
X
X
X
(see "4.5
page 16).
•
Do not iron the headgear in order to
keep the hook-and-loop fasteners
intact.
•
Do not dry the headgear in a tumble-
dryer.
5.3 Change of patient
You must subject the mask to a hygiene
preparation in the event of a change of
patient. For information on hygiene
preparation in the event of a change of
patient, please refer to our internet
brochure at www.weinmann.de. If you do
not have Internet access, please contact
Weinmann.
6 Disposal
You can dispose of all parts in domestic
waste.
7 Faults
Fault
Cause
Facial
Mask fits
pressure pain.
too tightly.
Mask fits
too loosely.
Draft in the
eyes.
Mask does
not fit.
JOYCEeasy
6 Disposal
Remedy
Loosen headgear.
Adjust position of
forehead support.
Tighten headgear.
Adjust position of
forehead support.
Use different mask
size. Contact your
specialist retailer.
EN
17
Publicité
