Publicité
Les langues disponibles
Les langues disponibles
Emptying of Grassbox
The grassbox is full and should be emptied as soon as grass clip-
pings remain uncollected on the ground behind your mower.
1
Attention! Rotary cutter blade
Undertake adjustments on the equipment only after the
motor is switched off and the cutting tool has come to a
standstill.
z Empty collection bag
z Remove potential blockages in the cutting space before
starting.
Maintenance
General
1
Caution! Rotating blades
Before all maintenance and cleaning tasks:
z Remove the sparking plug lead.
z Take care not to grab running cutters.
z For safety reasons, replace any worn or damaged parts.
When replacing, follow the instructions for installation
z Check all the visible fastening bolts and nuts regularly to be
sure they are snug and tighten them.
z Only use spare parts made by WOLF-Garten; otherwise you
do not have a guarantee that your mower meets safety regu-
lations.
Cleaning operations and blade change
1. Pull off the sparkplug connector!
2. Raise the cutting height to its highest position
3. For cleaning and changing the blade, tip the mower to the side
as illustrated
O
.
Sharpening and changing blade
1
Caution! Rotating blades
Before all maintenance and cleaning tasks:
z Remove the sparking plug lead.
z Take care not to grab running cutters.
1
Attention!
An unbalance can develop after regrinding of the blade.
z Always regrind the blades in a specialist workshop,
because an unbalance check should be undertaken
according to the safety regulations.
z Always change blades in a specialist workshop. A torque
spanner of 17 mm is mandatorily required.
Fastening torque of the screws: 38-42 N-m.
Adjusting the Bowden cable coupling
H
1. Raise the drive bracket
2. Loosen the locking nut
Q
3. Turn the setscrew
Q
(2) left until the drive wheels are blo-
cked when you pull the mower backwards.
4. Tighten locking nut
Q
(1).
14
All manuals and user guides at all-guides.com
M
.
L
.
P
(2) app. 2 cm and hold.
(1).
Tips for mowing
z To prevent strips of grass from being left unmowed, the cutting
paths must always overlap a few centimeters
Change oil only
z See engine manual
Cleaning of Spark Plug
z See engine manual
Cleaning of air filter
z See engine manual
Storage in winter
z Drain the fuel tank.
z Drain the carburettor.
–
This can be done by starting the engine and allowing it to
run until it stops of its own accord.
z Clean the mower thoroughly.
z Change the oil.
z Preserve the engine:
–
Unscrew the sparking plug and pour one dessert spoon of
engine oil into the sparking plug opening
–
Pull the starting cord slowly all the way (oil distribution in the
cylinder)
–
Screw the sparking plug back in position (do not replace the
sparking plug lead)
z Store the mower in a cool and dry location.
z The mower should be checked by a WOLF-Garten customer
service workshop in the autumn.
N
.
G
Publicité
