Abicor Binzel xFUME ADVANCED HP 230V-CSA Mode D'emploi page 18

8 Decommissioning
Running the cleaning process manually
8 Decommissioning
EN - 18
xFUME™ ADVANCED HP 230V – CSA
To clean the filter membranes, set the <On/Off>
1
switch to <Off> for a short period of time.
The filter membranes are cleaned once.
Set the <On/Off> switch to <On>.
2
Once the welding process begins, the device
receives a signal from the current clamp and
automatically starts the fume extraction process.
Set the <On/Off> switch to <Off>.
1
Remove the current clamp from the cable
2
assembly.
Disconnect the device from the power supply.
3