ABB MotiFlex e180 Guide D'installation Rapide page 8

8
• If the feedback module (e.g. FB-02) has a
power jumper, check that the correct voltage
is selected for the motor's feedback device.
Memory unit
The memory unit is an essential part of the
drive and must always be fitted. It is not
designed for frequent removal and insertion.
• Open the memory unit:
1
2
• Insert the memory unit:
Quick installation guide - MotiFlex e180
All manuals and user guides at all-guides.com
8 V 5.5 V
• Tighten the screw:
NOTE! The screw is supplied in the drive's
connector pack. Always tighten the screw to
protect the unit from vibration.
User's manual
Continue with drive start-up according to the
instructions in MotiFlex e180 User's Manual.