Installation Oft He Control Unit In The Front Cover Oft He Bottom Kitchen Cabinet - bora PIW 1 Instructions De Montage Et De Service

Installation
Installation of the control unit in the front
cover of the bottom kitchen cabinet
The four bores for the control unit must be
made at the centre of the cooktop.
A cable protection
floor (intermediate
floor) must
connected under-
neath the control
unit. It must be
attached removable for maintenance. At
the rear end of the hob an opening of
100 mm along the entire width of the
base cupboard must be provided for
better ventilation.
Please note that it is not possible to install
under-counter appliances below the cooktop
or the control unit.
Before installing and securing the control
unit in the bottom cabinet, connect the
electric cable
connection.
►
Using the enclosed padding panels, adjust the
total cover thickness to 36
and the padding plates must have a total
thickness of 36 mm!
The overall dimension of 36 mm must be
strictly observed to ensure proper operation
of the control unit!
Overall
Cover-
thickness of
thick-
the spacer
ness
plates
34 mm 2 mm
33 mm 3 mm
32 mm 4 mm
31 mm 5 mm
30 mm 6 mm
29 mm 7 mm
28
be
– see section Electric
mm. The front cover
Spacer plates
10 mm 5 mm 3 mm 2 mm
1
1
2
1
Cover-
thick-
ness
28 mm
27 mm
26 mm
25 mm
24 mm
23 mm
22 mm
21 mm
20 mm
19 mm
18 mm
17 mm
16 mm
15 mm
14 mm
13 mm
► Insert the control cabinet with mounted
plates from the rear into the front cover. Mount
the two
and secure them with the supplied nuts and
fixing bracket. Maximum tightening torque for
nuts: 10 Nm.
Do not tighten the nuts with pliers or a
similar tool!
Use only the enclosed fixing bracket!
Fixing bracket
1
Lens
2
1
Toggles
1
Spacer plates
Overall
thickness of
the spacer
10 mm 5 mm 3 mm 2 mm
plates
8 mm
9 mm
10 mm 1
11 mm
12 mm 1
13 mm 1
14 mm 1
15 mm 1
16 mm 1
17 mm 1
18 mm 1
19 mm 1
20 mm 1
21 mm 1
22 mm 1
23 mm 1
power control sleeves
Spacer
plates
Power control
Nuts
sleeves
Lens
g
1 1
1 2
1 2
1
1
2
1
2
1 1
1 1
1 2
1 1 1
1 2
1 1 2
1 2 1
spacer
from the front
Control unit
Cover