Diagram Of Machine/Main Operating Elements; Commissioning And Operation; Checks Before Operation - Kerbl Cow Cleaner Mode D'emploi

Non-observance of the manufacturer's operating, maintenance and
repair guidelines in these operating instructions rules out liability on the
part of the manufacturer if faults occur.
If there is a fault, first disconnect the mains plug. The fault may
only be rectified by authorised personnel.
Do not approach the machine if you are wearing loose clothing or
untied hair. RISK OF INJURY !
STOP

2. Diagram of Machine/Main Operating Elements

2

3. Commissioning and Operation

3.1 Checks before Operation

The "CowCleaner" cleaning machine must be checked for visual damage
or any danger areas before operation is started.
The following steps should be taken:
STOP
• Check the machine for loose or hanging parts or transport damage
• Check the cable insulation
• Check whether all protective devices are fitted and in perfect condition
• Check surrounds
• check whether there are sources of danger near the machine which
could affect proper and safe operation of the machine (water hose,
effects of the weather, hanging cables or ropes, ...).
20
4
1
1 Case
2 Brush Set
3 Electr. Control Unit
4 Jump bar protection
contain in the delivery capacity)
3
(don't