LiftMaster ELITE Serie Mode D'emploi page 14
Système d'ouverture de porte de garage pour usage résidentiel et commercial léger. installer en les portes de sectionnelle avec ensembles de torsion seulement
Masquer les pouces
Voir aussi pour ELITE Serie:
- Manuel d'installation (108 pages) ,
- Mode d'emploi (82 pages) ,
- Manuel du propriétaire (80 pages)
Publicité
Les langues disponibles
Les langues disponibles
Installation
8
Install the EverCharge
(optional)
®
If the optional EverCharge
installed at this time. The SPS can be mounted to either the ceiling or a wall within 3 feet
(.9 m) of the garage door opener.
Position the SPS on a structural support (ceiling joist or wall stud).
1
2
Attach the SPS to the support with the 1-1/2 inch lag screws (2) provided. There are
mounting holes on either side of the SPS.
3
Connect the SPS cord into the connector on the bottom of the garage door opener.
Follow all instructions included with the EverCharge
4
for proper operation.
EverCharge
®
Standby
Power System
®
Standby Power System (SPS)
Standby Power System is part of this installation it should be
®
Standby Power System to test
Connector
Wall Anchor
SPU Cord
14
Publicité
