Publicité
Les langues disponibles
Les langues disponibles
Problem
The product makes
an irregular scratch
pattern.
There are sudden un-
wanted movements
in the product.
The internal circuit
breaker releases.
Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
The wheels let you move the product shorter distances.
For longer distances, lift the product to move it or put the
product on a vehicle.
CAUTION:
behind a vehicle.
•
Be very careful when you move the product
manually or on surfaces with a slope. Small slopes
1211 - 004 - 09.12.2022
Cause
The diamond tools are incorrectly attached or
attached at different heights on the grinding
discs.
The diamond tools are of mixed types.
The head locks are loose or missing.
The resin tools are mixed or have unwanted
contamination.
The grinding discs are worn or damaged.
The grinding discs are worn or damaged.
The diamond tools are incorrectly attached or
attached at different heights on the grinding
discs.
The head locks are loose or missing.
Too high a load or not sufficient power sup-
ply.
Transportation, storage and disposal
Be careful during
Do not tow the product
Solution
Make sure that all diamond tools are installed
correctly and have the same height.
Make sure that all segments are the same
diamond grit and bond. If the diamond seg-
ments are rough, space out the rough dia-
mond segments equally. Operate the product
on an abrasive surface until all segments
have the same height.
Make sure that all head locks are in position
and tightened.
Make sure that all resins are the same dia-
mond grit and bond and that there is no con-
tamination. To clean the resin tools, operate
them for a short time on a lightly abrasive
surface.
Do a check on the grinding discs for broken
sections or too much movement.
Examine the grinding discs for damaged
parts and too much movement.
Make sure that all diamond tools are installed
correctly and that all have the same height.
Make sure that all head locks are in position
and tightened.
Do a check of the power supply.
Decrease the grinding pressure, increase the
number of diamond tools or increase the
bond hardness.
can result in a fast movement that is not possible to
brake by hand.
•
Safety the product during transportation. Make sure
that it cannot move.
•
Put some type of protection on the product
during transportation. The protection keeps natural
elements such as rain and snow away from the
product.
•
Always use the lifting eye on the product when you
lift the product.
•
Do not lift the product by the handlebar, motor,
chassis or other parts.
•
Transportation is best done on a pallet.
•
Always lift the product with a lift or forklift.
•
Do not use a forklift if the product is not put on a
pallet or carriage. This can cause damage to the
grinding discs and other internal components.
19
Publicité
