Newage PLATINUM 22 Guide D'installation Et Mode D'emploi page 10

Assembling the Kamado
Gather the following parts and tools
supplied with the package.
Top Vent M5x35 Screw
Handle Cap Nuts
M6x12 Washers Wrench
Install four cap nuts along with the
2
spring washer and M6x12 washer using a
spanner to secure the handle.
Secure the Top vent to Kamado by
4
installing M5x35 screws using the
provided screwdriver.
10
All manuals and user guides at all-guides.com
1
M5 Nut
Spring Washers
Phillips
Screwdriver
3
4
Install handle in position by matching
holes with the screws on the Kamado.
Install Top vent on top of the Kamado.
Make sure to align side holes on the vent
with the holes on top of the Kamado.
Open the kamado lid and tighten nuts
from inside using the spanner.