Installing The Appliance - Junker JG4119260 Manuel D'utilisation Et Notice D'installation

Secure the four supporting feet to the base of the
6.
microwave.
17.10 Installing the appliance
Secure the spacers to the appliance in accordance
1.
with the wall thickness.
2. Note:
Do not trap or kink the power cable.
Insert the appliance into the unit and move it to the
right.
Screw the appliance in until the appliance is cent-
3.
rally aligned.
Check the clearance to the adjacent appliances.
4.
The clearance to the adjacent appliances must be
at least 3 mm.
Remove any packaging material and adhesive film
5.
from the cooking compartment and the door.
Installation instructions en
=
=
51