Aqua Clean; Cleaning The Control Panel; Troubleshooting - Junker JG4119260 Manuel D'utilisation Et Notice D'installation

en Troubleshooting
12.4 Cleaning the front of the appliance
ATTENTION!
Incorrect cleaning may damage the front of the appli-
ance.
Do not use glass cleaner, metal scrapers or glass
▶
scrapers for cleaning.
To prevent corrosion on stainless steel fronts, re-
▶
move any limescale, grease, starch and albumin
(e.g. egg white) stains immediately.
On stainless steel surfaces, use special stainless
▶
steel cleaning products suitable for hot surfaces.
Read the information on cleaning products.
1.
→ Page 39
Clean the front of the appliance using hot soapy wa-
2.
ter and a dish cloth.
Note: Slight differences in colour on the front of the
appliance are caused by the use of different materi-
als, such as glass, plastic and metal.
For stainless steel appliance fronts, apply a thin
3.
layer of the stainless steel cleaning product with a
soft cloth.
You can obtain the stainless steel cleaning products
from the after-sales service or the online shop.
Dry with a soft cloth.
4.
12.5 Cleaning the control panel
ATTENTION!
Incorrect cleaning may damage the control panel.
Never wipe the control panel with a wet cloth.
▶
Read the information on cleaning products.
1.
→ Page 39
Clean the control panel using a microfibre cloth or a
2.
soft, damp cloth.
Dry with a soft cloth.
3.
12.6 Cleaning the accessories
Read the information on cleaning products.
1.
→ Page 39
Soften baked-on food remnants with a damp dish
2.
cloth and hot soapy water.
13 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
40
Clean the accessory with hot soapy water and a soft
3.
dish cloth or a scrubbing brush.
Clean the wire rack with stainless steel cleaner or in
4.
the dishwasher.
Use steel wool or oven cleaner to remove very
heavy soiling.
Dry with a soft cloth.
5.
12.7 Cleaning the door panels
ATTENTION!
Incorrect cleaning may damage the door panes.
Do not use a glass scraper.
▶
Read the information on cleaning products.
1.
→ Page 39
Clean the door panels with a soft dish cloth and
2.
glass cleaner.
Note: Shadows on the door panels, which look like
streaks, are caused by reflections made by the in-
terior lighting.
Dry with a soft cloth.
3.
12.8 Aqua Clean
The cleaning aid is a quick alternative for occasionally
cleaning the cooking compartment. The cleaning aid
softens dirt by vaporising the soapy water. The dirt can
then be removed more easily.
Setting the cleaning aid
Add a few drops of washing-up liquid to a cup of
1.
water.
Place a spoon in the cup to prevent delayed boiling.
2.
3. Place the cup in the centre of the cooking compart-
ment.
Set the microwave power setting to 600 W.
4.
5. Set the duration to three minutes.
Press ⁠ .
6.
a An audible signal sounds once the cooking time
has elapsed.
Once the duration has elapsed, keep the door
7.
closed for a further three minutes.
Wipe out the cooking compartment with a soft cloth.
8.
Leave the cooking compartment to dry with the door
9.
open.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.