Xerox PostScript Emulation Phaser 3150 Guide D'utilisation page 6

All manuals and user guides at all-guides.com
7
8
N
OTE
PostScript printer driver, you need to select it in the printer
properties after installing the memory DIMM.
To do so:
1. Click the Windows Start menu.
2. For Windows 98/Me/NT 4.0/2000, select Settings and then
3. Select the PostScript printer driver for the 3150.
4. Click the right mouse button on the printer icon and select
5. For Windows 98/Me, select Device Options tab.
6. Select the total memory size installed in Installable Option.
4
Using a PostScript Driver
Replace the two screws.
Reconnect the power cord and printer cable, and turn the
printer on.
: If you want to use an optional memory DIMM with your
Printers.
For Windows XP, select Printers and Faxes.
Properties.
For Windows NT 4.0/2000/XP, select Device Setting tab.
For example, if you installed 32 MB memory DIMM, then select
64 MB (additional memory + 32 MB base memory) and click OK.
For Windows 98, select Installable Option ¡
VMOption ¡ change setting for:VMOption ¡
Select the total memory size installed.