DeWalt DWH205DH Traduction De La Notice D'instructions Originale page 18

EngLIsh
suitable for the dust in question. Ensure good ventilation of the
workplace.
Material containing asbestos may only be handled by
professionals.
Observe regulations applicable in your country for the materials
to be processed.
Residual Risks
The following risks are inherent to the use of the dust
extraction system:
• Injuries caused by touching the rotating parts or hot parts of
the tool
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment of hearing.
• Risk of squeezing fingers when changing the accessory.
• Health hazards caused by breathing dust developed when
working in concrete and/or masonry.
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.

WARNING: ALWAYS READ AND OPERATE THE TOOL
AS INSTRUCTED IN THE TOOL INSTRUCTION MANUAL.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
n
Visible radiation. Do not stare into light.
Date Code Position (Fig. F)
The production date code 18
by a 2-digit week and is extended by a 2-digit factory code.
Package Contents
The package contains:
1 Dust extraction system
1 Small dust extraction head
1 Standard dust extraction head
1 Large dust extraction head
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
Take the time to thoroughly read and understand this manual
prior to operation.
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Dust collection box
1
16
consists of a 4-digit year followed
Dust collection box release
2
buttons
Filter cleaning mechanism
3
Depth adjustment button
4
Adjustment for drill bit
5
length button
Telescope
6
Dust extractor ring
7
Intended Use
Your dust extraction system DWH205DH has been designed for
the extraction of dust in professional hammerdrilling in masonry
or concrete, and with solid drill bits mounted to the power tool.
DO nOt use for drilling plastic, wood or metal.
DO nOt use with hollow bits or core bits.
Please observe the national regulations when working with
substances hazardous to health.
• This dust extraction system will fit the D
V cordless SDS plus® hammer. For more information about
D WALT power tools compatible with this attachment,
e
please contact your local dealer, refer to the addresses at the
back of the manual or visit www.dewalt.com.
DO nOt use under wet conditions or in the presence of
flammable liquids or gases.
The dust extraction system is an attachment for use with
professional power tools.
DO nOt let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Worklight (Fig. A)

CAUTION: Do not stare into worklight. Serious eye
injury could result.
There is a worklight 9 located on the top of the dust extractor.
The worklight is activated when the trigger switch is depressed,
and will automatically turn off 20 seconds after the trigger
switch is released. If the trigger switch remains depressed, the
worklight will remain on.
nOtE: The worklight is for lighting the immediate work surface
and is not intended to be used as a flashlight.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. Be sure the
trigger switch is in the OFF position. An accidental start-up
can cause injury.
Dust extractor ring release
8
button
Worklight
9
Dust extraction head
10
Dust brush
11
Dust extractor ring lock
12
button
WALT DCH263 18
e