Publicité
Les langues disponibles
Les langues disponibles
EngLIsh
dust extraction system
DWH205DH
Congratulations!
ou have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Contact pressure
Small head
Maximum drill bit diameter
Maximum drill bit length (overall)
Maximum drilling depth
Standard head
Maximum drill bit diameter
Maximum drill bit length (overall)
Maximum drilling depth
Large head
Maximum drill bit diameter
Maximum drill bit length (overall)
Maximum drilling depth
Tool compatibility
Weight
Noise values and vibration values (triax vector sum) of the combination of
power tool and connected dust extraction system according to EN62841-2-6. To
calculate the noise and vibration values of the combination of power tool and
connected extraction system, the L
(Power Tool) values from the operationg instructions of the connected power
tool are required.
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level) dB(A)
Drilling into concrete
Dust extraction will not increase the vibation of the attached power tool.
Vibration emission value a
h,HD
Uncertainty K
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
14
WALT one of the
e
DWH205DH
V
18
DC
N
80
mm
12
mm
180
mm
180
mm
26
mm
180
mm
180
mm
38
mm
180
mm
180
DCH263 only
kg
1.5
(Power Tool), L
(Power Tool) and ah,
PA
WA
dB(A) L
(Power Tool) +3dB
PA
dB(A) L
(Power Tool) +3dB
WA
K (Power Tool)
m/s
2
a
(Power Tool)
h,HD
m/s
2
K (Power Tool)
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
1
EC-Declaration of Conformity
Machinery Directive
Dust Extraction System
DWH205DH
D
WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015 + A11:2022, EN IEC 62841-2-
6:2020 + A11:2020.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice-President Engineering, PTE-Europa
HG
D
WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
31.12.2022
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
Dust Extraction System
DWH205DH
D
WALT declares that these products described under
e
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015 + A11:2022, EN IEC 62841-2-6:2020 + A11:2020
REGULATIONS 2008
WALT at
e
WALT.
e
Publicité
