Hillyard Trident FMD20 Manuel D'utilisation page 9

atmosphere.
• In the event of a fire, use a powder extinguisher. Do not use water.
• Avoid using the brushes while the appliance is at a standstill, so as
not to damage the floor.
• Do not knock against shelving or scaffolding, where there is a danger
of falling objects. The operator must always be equipped with the
appropriate safety devices (gloves, shoes, helmet, goggles, etc.).
• If the appliance does not work properly, check this is not caused
by failure to carry out routine maintenance. Otherwise, ask for
intervention of the authorised technical assistance centre.
• If you need to replace any components, request the ORIGINAL spare
parts from an Authorised dealer and/or Retailer.
• Restore all electrical connections after any maintenance interventions.
• Have the appliance checked by an authorised technical assistance
centre every year.
• When disposing of consumable materials, observe the laws and
regulations in force. When, after years of valuable work, your
appliance needs to be finally decommissioned, dispose of the
materials contained in it appropriately, bearing in mind that the
appliance is made of fully recyclable materials.
• If the power supply cable gets damaged, the appliance must be
stopped if it is operating. Disconnect the plug from the power supply,
and have the cable replaced immediately by an authorised service
centre.
• Before using the appliance, check that all the hatches and covers are
positioned as shown in this Use and Maintenance Manual.
• Only use the discs supplied with the device, or those specified in the
Instruction Manual. The use of other discs could compromise safety
levels.
• Before connecting the appliance to the power outlet, check that
the electrical data on the nameplate corresponds to those of the
power supply. The appliance must only be powered by alternating
9
9 9