marklin 44 DB Serie Mode D'emploi page 6

Safety Notes
• This locomotive is to be used only with an operating
system designed for it (Märklin AC, Märklin Delta,
Märklin Digital, DCC or Märklin Systems).
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This locomotive must never be supplied with power from
more than one transformer.
• Pay close attention to the safety notes in the
instructions for your operating system.
• The feeder track must be equipped to prevent interference
with radio and television reception, when the locomotive is
to be run in conventional operation. The 74046 interference
suppression set is to be used for this purpose.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.
Important Notes
• Please note: Since this is a replica of the 3047 model,
2 pickup shoes are mounted for current as on the
original!
On model railroad layouts with braking modules or seve-
ral separate current circuits installed in the track, these
pickup shoes will cause a short circuit when crossing the
separation points despite the use of rocker insulators!
• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Märklin dealer for repairs or
spare parts.
6
All manuals and user guides at all-guides.com
• The warranty card included with this product specifies
• Disposing: www.maerklin.com/en/imprint.html
Functions
• Recognition of the mode of operation: automatic.
• Mfx technology for the Mobile Station / Central Station.
• Address set at the factory: MM 47 / DCC 03
• Setting the locomotive parameters (address, accelerati-
• Headlights, changing over with the direction of travel.
• Various controllable functions.
• Only the smoke, running, and light changeover functions
Note:
The digital protocol with the most possibilities is the highest
order digital protocol. The sequence of digital protocols in
descending order is:
If two or more digital protocols are recognized in the track,
the decoder automatically takes on the highest value digital
protocol.For example, if mfx & MM are recognized, the mfx
digital protocol is taken on by the decoder. Individual proto-
cols can be deactivated with Parameter CV 50.
the warranty conditions.
Name set at the factory: BR44670DB
on/braking delay (ABV), maximum speed):
with the Control Unit, Mobile Station, Central Station.
are available in analog operation.
Priority 1: mfx
Priority 2: DCC
Priority 3: MM