Publicité
Les langues disponibles
Les langues disponibles
2
appliance description
1.
Lid with sealing ring
2.
On/off button
3.
Handle
4.
Base with storage compartment
5.
Maximum indication for heating milk - MAX
6.
Maximum indication for frothing - MAX
7.
Whisk (frothing)
8.
Mixer (heating)
3
before the first use
Before you use the appliance for the first time, please do
as follows: Carefully unpack the appliance and remove all
the packaging material. Keep the material (plastic bags and
cardboard) out of reach of children. Check the appliance after
unpacking for any visible damage, possible from transportation.
Place the appliance on a stable and heat resistant surface.
Clean the lid, the whisk and the mixer with warm soapy
water. Dry the parts thoroughly. Make sure that the parts are
completely dry.
Wipe the exterior and interior with a soft damp cloth and dry
thoroughly. The appliance is only suitable heating and frothing
milk. Never fill the appliance with other drinks.
10
•
English
MK650 - instructions 0314.indd 10
All manuals and user guides at all-guides.com
4
Check that the voltage in your home corresponds with the
voltage printed on the bottom of the appliance and plug
the appliance in. Lift the lid and fit the whisk in the jug. Fill
the desired amount of milk into the jug. Do not exceed the
maximum of the lower max. mark - MAX
milk expands and causes the pitcher to overflow, if filled up too
high. The minimum capacity is 50 ml. Put the lid back on the jug
and place the appliance on the base.
Frothing and heating
Press the button
light in the button will light up and the whisk will start turning.
Depending on the filling volume, the preparation stops
automatically after 95 to 115 seconds. The control light goes out.
Just frothing
Press the button
The blue control light in the button will light up and the whisk will
start turning. Depending on the filling volume, the preparation
stops automatically after 120 seconds. The control light goes
out.
After the preparation is completed, remove the lid upwards and
pour or ladle the milk foam into a cup or bowl.
Do not remove the foam with a spoon or other metal object.
This will damage the coating.
4
1
5
2
3
6
8
7
preparing milk foam
to start the preparation. The red control
for 1 to 2 seconds to start the preparation.
- 125 ml. Frothed
27-8-2014 12:14:32
Publicité
