Publicité
Notes on digital operation:
G
This locomotive comes from the factory pro-
grammed for the digital address "01" (Selectrix) /
"03" (DCC). Number of speed levels that have
been set: 28 (DCC) and 31 (Selectrix).
G
As delivered from the factory, it is not possible
to operate the locomotive with opposed polarity
DC power in a braking section. It is possible to
reprogram the locomotive for this (CV 29). After
you reprogram the register CV 29, you will not be
able to operate the locomotive on analog DC power
or with Trix-Selectrix.
G
Trouble-free programming of the decoder can only
be guaranteed when it is done with original Trix
Selectrix components.
G
The train has a technical feature in DCC operation
in which its lights will go on when the lighting
function is turned off and the train is stopped in
a block.
All manuals and user guides at all-guides.com
G
G
G
G
The locomotive can cross from an analog to a
digital part of a layout or vice versa only when the
train is stopped in a transition section and the
power in this transition section is changed from
analog to digital or vice versa.
A horn sound can be activated in digital operation
by means of the EMV circuit when the model is
stopped and when the headlights are turned on.
It is not possible to run this model with control
systems that use pulse width control in analog
operation.
The use of acceleration and braking delay
systems in analog operation can cause functional
limitations in the model and operating problems.
5
Publicité
