gdw 1660T30 Instructions De Montage page 19

BMW 6 Coupé
01/2004 - ....
Ref. 1660T30
GENERAL INSTRUCTIONS:
Fitting :
- Make sure that the tow bar has not been damage during transport and it is the right reference
for the vehicle.
- Read the fitting instruction before starting and follow them very precisely during the fitting.
- Present the tow bar under the car first to check if all points are right.
- If holes have to be drilled, check that no wires can be damaged, remove all soundproofing
material, clean and protect the drilled holes with an anticorrosive product.
- If the vehicle is equipped with special bumpers (sport or tuning parts...) first contact the
technical service of GDW to be sure that the tow bar can be fitted.
Guarantee :
- The indicated towing weight, "D" and "S" values may not be exceeded
- The tow bar has to be checked after 1.000 km and every year :
o All bolts should be checked and retightened if necessary
o Repair any damage to the paint finish
o Replace any damaged components
o Parts of the detachable tow bars must be kept well greased.
Use :
-
If the towing ball covers the number plate or the fog light, it must always be removed
when no trailer is used.
Important Information!
We wish to expressly draw to your attention that installing this trailer hitch can lead to loss of the guarantee or the
vehicle producer's warranty obligations. We also advise you that installing the trailer hitch can lead to greater stress
and strain and hence to greater vehicle wear and tear.
The general terms of warranty according to the General Term of Business apply for the delivery of the trailer hitch (see
No. 7 Material Defects and Guarantee). Liability for damage to other parts and consequential damage due defects of
the trailer hitch is expressly excluded as far as minor negligence on the part of Rameder is involved.
The customer is also expressly advised to inform the purchaser of the vehicle of aforesaid limitations.
+ Cabrio
(type E63)
04/2004 - ....
MUST BE KEPT IN THE VEHICLE
(type E64)