Wrinkled or creased
documents
Torn documents
Carbon paper
Extremely thin,
translucent paper
Photos
Papers that are stuck
together
•
Before loading documents, make sure that the ADF access door is securely latched.
•
When loading a stack of documents, make sure that all of the documents are the
same width.
•
When loading pages in landscape orientation, make sure that the top of the pages
point toward the back of the scanner. Doing so ensures that the scanner automatically
rotates the page correctly, if you have set the HP scanning software to rotate
landscape pages automatically.
•
The maximum capacity of the ADF is 50 sheets of 75 g/m
heavier paper, the maximum capacity is decreased.
•
When loading small pages, such as A5 paper size (148 x 210 mm or 5.8 x 8.3 in),
load a stack of at least five pages to ensure that the ADF properly detects and feeds
the stack. When scanning fewer than five small pages, scan the pages by placing
them on the scanner glass.
•
When loading long documents that hang over the end of the input tray, pull out the
input tray extender (1), and then load the documents (2).
Curled documents
Documents with paper
clips or staples
Coated paper
Paper with adhesive
notes or flags attached
Overhead
transparencies
Paper with wet
substances such as
glue or correction fluid
(20 lb) paper. When using
2
Load originals
13