Télécharger Imprimer la page

Power Fist 8643926 Mode D'emploi page 23

Publicité

Les langues disponibles

Les langues disponibles

V 4.0
1.
Obtain a funnel, six ounces of RV (Recreational Vehicle) antifreeze and
approximately 36 inches of garden hose with a male hose connector on
one end.
NOTICE! Only RV antifreeze is suitable. Other types of antifreeze are corrosive
and can damage the pressure pump.
2.
Disconnect the spark plug lead and ensure it cannot touch any metal on the
pressure washer by wrapping the lead in insulating tape.
3.
Connect the 36 in. length of garden hose to the pump's water inlet.
4.
Place the funnel in the end of the hose and add the RV antifreeze.
5.
Pull engine starter rope slowly several times until antifreeze comes out of
pressure hose connection of the pressure pump.
6.
Remove the garden hose from water inlet of pressure pump and seal the
pump's outlet.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing uncontrolled
discharge of waste oil.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
4.2 GPM @ 4,000 PSI Gas Pressure Washer
8643926
23

Publicité

loading