Power Fist 8643926 Mode D'emploi page 20

8643926
2. Inspect the tool fittings, alignment and hoses periodically. Have damaged or
worn components repaired or replaced by an authorized technician. Only use
identical replacement parts when servicing.
3. Only use accessories intended for use with this tool.
4. Keep the tool handles clean, dry and free from oil/grease at all times.
5. Maintain the tool's labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CHECK HIGH PRESSURE HOSE
WARNING! NEVER repair the high pressure hose. Repairs can fail and will be
weaker than the hose itself. A hose that fails while under pressure can inflict a
serious injury. Replace with a hose that has a maximum pressure rating that
exceeds the pressure washer's maximum output.
The high pressure hose can develop leaks due to wear, kinking or misuse and
abuse. Inspect the hose each time before using it. Check the hose for cuts, leaks,
abrasions or bulging spots. Also check the couplings to ensure they are tight and
are not loose. Replace the hose immediately if any of these conditions exist.
CHECK SIPHON HOSE
1. Examine the filter on the detergent tube and clean if clogged.
2. The tube should fit tightly on the barbed fitting.
3. Examine the tube for leaks or tears. Replace the filter or tube if either
is damaged.
CHECK SPRAY GUN
Examine the hose connection to the spray gun and make sure it is secure. Check
that the trigger lock is in place to prevent accidental spraying. Replace the spray
gun immediately if the trigger lock is damaged or will not remain in place.
CHECK SPRAY WAND AND PRESSURE NOZZLES
A pulsing sensation felt when squeezing the trigger indicates either the spray wand or
the pressure nozzle is partially clogged and is causing pressure to build in the pump.
20
All manuals and user guides at all-guides.com
4.2 GPM @ 4,000 PSI Gas Pressure Washer
For technical questions call 1-800-665-8685
V 4.0