Shindaiwa T282 Mode D'emploi page 5

Product Description
Gearcase
Trimmer Head
Using the illustration as a guide, famil-
iarize yourself with your machine and its
various components. Understanding your
machine helps ensure top performance,
long service life and safer operation.
Specifications
Engine Name
Engine Model
Engine Type
Dry Weight (Without guard and strap)
Dimensions
Bore x Stroke
Displacement
Maximum Power Output
Fuel/Oil Ratio
Fuel Tank Capacity
Carburetor Type
Ignition
Spark Plug
Air Cleaner Type
Starting Method
Stopping Method
Transmission Type
EPA Emission Compliance Period*
*Specifications are subject to change without notice.
All manuals and user guides at all-guides.com
Outer Tube
Cutting
Attachment Shield
Gearcase
Trimmer Head
WARNING!
Do not make unauthorized
modifications or alterations to any of
these units or their components.
*The EPA emission compliance period referred to on the emission compliance label located on the engine, indicates
the number of operating hours for which the engine has been shown to meet Federal emission requirements. Cat-
egory C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended)
T282
Ignition
Switch
Fuel
Tank
Throttle
Trigger
Strap
Handle
Outer Tube
Cutting
Attachment Shield
T282
5.7 kg/12.6 lb.
1785 x 315 x 345 mm/70.3 x 12.4 x 13.6 in.
1.38 x 1.18 in./ 35 x 30 mm
1.4 HP (1.0 kW) @ 8000 (min
50:1 with ISO-L-EGD or JASO FD class 2-cycle mixing oil*
Walbro, WYK, diaphragm-type
One-piece electronic, transistor-controlled
Non-reversible foam filter element
Automatic, centrifugal clutch w/bevel gear
T282X
Ignition
Switch Throttle
Interlock
Grip
Throttle
Trigger
Barrier
Bar
Hanger
IMPORTANT!
The terms "left", "left-hand", and "LH";
"right", "right-hand", and "RH"; "front" and
"rear" refer to directions as viewed by the
operator during normal operation.
T282X
S282EV
2-cycle, catalyst
6.0 kg/13.2 lb
1790 x 375 x 330 mm/70.5 x 14.8 x 13 in.
28.9 cc/1.7 cu. in.
)
-1
750 ml/25.4 oz.
.
BPMR6A
Recoil
Slide switch
Category A
Fuel
Tank
5