Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
4. Attach the SES ECU to the topside of the Glove Box
1. Route the Main Harness's 24P Connector toward
2. Route the Main Harness's 8P and 2P Connectors
- 7 -
Inner Cover as shown.
• Clean attachment surface using isopropyl alcohol and
cleaning towel.
• To achieve maximum bond strength of Tape, the
attachment surface temperature must be between
68°F-110°F (20°C-43°C) upon application.
• Verify that the SES ECU is firmly attached.
Main Harness Installation
• Use caution when installing the Main Harness. Be
sure to route and attach harness away from sharp
metal surfaces.
the Glove Box area.
toward the J/B area.
Publicité
