Publicité
Les langues disponibles
Les langues disponibles
Hood Switch Installation and Wiring Procedure
All manuals and user guides at all-guides.com
1. Remove and discard the Vehicle Bolt.
2. Connect the Sub-Harness 2P Connector to the
T
3. Attach the Hood Switch Bracket to the Hood Switch
4. Attach the Harness Clamp to the Hood Switch
- 11 -
Vehicles With Turbo ECU
Hood Switch.
with the Black Bolt (M6×16).
• Tighten the Bolt to 5.6 N·m (0.57 kgf·m, 4.13 ft-lb)
Bracket as shown.
Y
Hood Switch
H
2P Gray
I
2P Black
Publicité
