Vehicle Disassembly
All manuals and user guides at all-guides.com
1. Place the Vehicle in Park with the Parking Brake set.
2. Disconnect the Negative Battery Terminal.
3. Remove the Driver's Side Dash Cover.
4. Remove the Lower Dash Cover No.1.
5. Remove the Lower Dash Cover No.2.
6. Remove the Driver's Side Knee Airbag carefully .
- 3 -
• Do not touch the Positive Battery Terminal with the
Negative Terminal.
• Note the Battery Cable Position as it will be reinstalled
in the same position.
• Wait at least 30 seconds after disconnecting the
Negative Battery Terminal before disconnecting the
Airbag Connector.
• Disengage 4 Clips.
• Remove 1 Screw.
• Disengage 8 Clips.
• Disconnect Vehicle connectors.
• Remove 1 Screw.
• Disengage 8 Clips by pulling both the top and
bottom of the panel simultaneously.
• Remove 2 Nuts.
• Hold Airbag as to prevent tension on the Harness.
• Disengage the Yellow Connector Lock by using a
pick tool to lift upward.
• Use a Panel removal tool to carefully lift upward to
unplug the Airbag Connector.
• Wait at least 30 seconds after disconnecting the
Negative Battery Terminal before disconnecting the
Airbag Connector.