Publicité
Les langues disponibles
Les langues disponibles
Registration Procedure
All manuals and user guides at all-guides.com
1. Open the Hood and leave it open throughout the
2. Temporarily reconnect the Negative Battery Cable.
3. With foot off the brake pedal, Press the "ENGINE
4. Remove the Tape securing the Main Harness's 1P
5. Connect the 1P SES Diagnostic Connectors.
6. Register the SES ECU using the procedure on
- 15 -
registration procedure.
• Doors can remain open during registration.
• Do not touch the Positive Battery Terminal with the
Negative Battery Terminal.
START STOP" button twice to switch the ignition on.
SES Diagnostic Connectors.
the next page.
Publicité
