Joie i-Traver Manuel D'instructions page 7

1. Fit the ISOFIX guides with the
ISOFIX anchor points.
12
ISOFIX guides can protect the
surface of the vehicle seat from
being torn. They can also guide
the ISOFIX connectors.
2. Press the ISOFIX adjusting
button to pull out the ISOFIX
connectors.
13
Rotate the ISOFIX connectors 180
degrees until they are pointing in
the direction of the ISOFIX guides.
14
11
All manuals and user guides at all-guides.com
12
The
13
14
2
1
2
1
3. Line up the ISOFIX connectors
with the ISOFIX anchor points,
and then click both ISOFIX
connectors into the ISOFIX
guides.
15
!
Make sure that both ISOFIX
connectors are securely
attached to their ISOFIX
guides. The colors of the
indicators on the both ISOFIX
connectors should be
completely green. -1
15
!
Check to make sure the
booster is securely installed
by pulling on the both ISOFIX
connectors.
4. To remove the booster:
a. Press the secondary lock
button -1 first and then the
16
button -2 on the ISOFIX
16
connectors before removing
the booster from the vehicle
seat.
b. Rotate the ISOFIX connectors
by 180 degrees, then press
the ISOFIX adjusting button to
fold the ISOFIX connectors.
17
15
1
16
2
1
12