Ribimex ELAGSB Manuel D'instructions Et D'utilisation page 19

Removing the tool from the telescopic pole
• Release the latch toggle clamp.
• Press down the pole lock button, then remove the tool from the telescopic pole.
Installing/removing battery pack and battery adaptor (Fig. 7)
• Completely insert the battery pack (7) and battery adaptor (5) into the guide slot on the other
side of the telescopic pole, until a "click" sound is heard.
• To release the battery adaptor, press the battery adaptor release button (8), then pull the adaptor
away from the power tool.
• Follow Section 4.5 to install/remove battery pack on the battery adaptor.
V. OPERATION
5.1- Intended use
This mini chainsaw is intended for domestic outdoor use in cutting woods, including branches, logs
and beams of a diameter determined by the cutting length of guide bar. The tool is not designed for
artisanal, commercial, professional and/or industrial use.
Fig. 6
Fig. 7
Page 19 / 36