Publicité
Les langues disponibles
Les langues disponibles
When using with Ribimex telescopic pole (PRBAT20/EST, not included)
3.1- General safety warnings
• Understand the product. Read and follow the instructions in this manual.
• Do not disassemble or modify the product.
• Do not use this product if it is not completely assembled or if any parts appear to be loosened,
missing or damaged.
• Use and store in dry environment only.
• Maintain good housekeeping and sufficient lighting in the working area.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts.
• Keep children and bystanders away while operating this product.
• Cleaning and user maintenance shall not be made by children.
• Use attachments/accessories specified by the manufacturer.
• Perform service maintenance by qualified personnel only.
3.2- Additional safety rules for electric power tool
Electric tool
• When the tool is not in use or before performing cleaning, turn it off and remove the battery
pack.
• Do not leave the tool unattended while in use or immediately after use.
• Keep handles and grasping surfaces dry, clean and free from oil and grease.
• Do not expose the tool to rain or wet conditions. Water entering the tool will increase the risk
of electric shock.
• Do not operate the tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
• Maintain labels and rating plate through the life of service.
• Do not use the tool if the switch does not turn on and off. Any tool that cannot be controlled
with the switch is dangerous and must be repaired.
• Do not use the tool while you are tired or under the influence of drugs, alcohol or medication.
• This tool is not intended for use by children and persons with physical, sensory or mental
limitations or a lack of experience or knowledge.
• Store idle power tool out of the reach of children and do not allow persons unfamiliar with the
tool or these instructions to operate the tool.
Battery charger
• Do not abuse the power cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts.
• Use the power adaptor indoor only.
• Do not place any object on top of charger or on a surface that might block the ventilation slots
and result in excessive internal heat. Place the charger in position away from any heat source.
• Do not disassemble charger. Take it to authorized service center when service or repair is
required. Incorrect reassemble may result in a risk of electric shock or fire.
• Perform charging in ambient environment.
• Unplug the charger from the main when not in use.
Keep a minimm distance of 10m away from the overhead lines when working
with the tools.
Danger due to flung objects. Keep spectators, especially children and pets, at
least 15m away from the working area.
Page 15 / 36
Publicité
