Ribimex ELAGSB Manuel D'instructions Et D'utilisation page 17

• 1 instruction manual
4.3- Assembly
No assembly or adjustment is required by the user.
4.4- Installing/removing the battery adaptor (Fig. 2)
• Completely insert the battery adaptor (5) into the power tool along the guide slot, until clicking
into position.
• To release the battery adaptor, press the battery adaptor release button (8), then pull the adaptor
away from the power tool.
4.5- Installing/removing the battery pack (Fig. 3)
• To install the battery pack (7), completely insert the battery into the battery compartment.
• The battery pack is properly installed when a "click" sound is heard.
• To remove the battery pack, press down the battery release button (6), then pull out the battery
pack.
4.6- Filling oil reservoir (Fig. 4)
• Remove the oil reservoir cap (2) and fill with chain lubricating oil to the max level before the
tool to be operational. See Fig. 4a.
• CAUTION! Avoid dirt from getting into the oil reservoir.
• Close the oil reservoir cap.
Fig. 2
Fig. 3
Page 17 / 36