Unpacking and Checking Contents
Unpack your lathe from its carton and check to see that you have all of the following items. Do not
turn your machine ON if any of these items are missing. You may cause injury to yourself or damage
to your machine.
Tools Required for Assembly
Item
Description
Phillips Screwdriver
Adjustable Wrench
Unpacking and Clean-up
1. Carefully lifting the lathe from the carton, and check that all of the components and contents
have been included. Place parts on a protected surface.
2. Clean all rust protected surfaces with kerosene or diesel oil. Do not use; gasoline, paint
thinner, mineral spirits, etc. These may damage painted surfaces.
3. Set packing material and shipping cartons to the side. Do not discard until machine has been
set up and is running properly.
Contents of Package
Item Description
A
Lathe..........................................................1
B
Knokout Bar................................................1
C
Wrench.......................................................1
D
Tool Rest.....................................................1
E
Live Center.................................................1
F
Spur Center................................................1
G
Spindle Lock Assembly...............................1
H
Knockout Bar for Spur Center......................1
I
Tool Holder...........................................1
J
Pan head screw...........................................2
2
EN
Q'ty