Publicité
Les langues disponibles
Les langues disponibles
6. Inspecting, handling and unpacking the unit
6.1. Inspection
At delivery, the unit must be checked and any damage must be re-
ported immediately to the carrier's claims agent.
6.2. Handling
1 When handling the unit, take into account the following:
Fragile, handle the unit with care.
Keep the unit upright in order to avoid compressor damage.
2 Choose beforehand the path along which the unit is to be brought
in.
3
ri
i
c o
o i
its original package to prevent damage during transport.
4
2
1
4
1
Packaging material
2
Belt sling
3
Opening
4
Protector
4 Lift the unit preferably with a crane and 2 belts of at least 27 ft.
o
o
i
fi
Always use protectors to prevent belt damage and pay attention to
the position of the unit's center of gravity.
NOTE
Use a belt sling of ≤3/4 in. (20 mm) wide that adequately bears the
weight of the unit.
A forklift can only be used for transport as long as the unit remains on
its pallet as shown above.
6.3. Unpacking
CAUTION
o
oi i
r
o o o c
WARNING
Tear apart and throw away plastic packaging bags so that children will
not play with them. Children playing with plastic bags face danger of
death by suffocation.
1 Remove the unit from its packing material.
Take care not to damage the unit when unpacking.
2
o
o
fi i
3 Make sure that all accessories as mentioned in 2.1. Accessories
supplied with this unit on page 3 are available in the unit.
7
o i fi
i
io
o i io i
2
4
3
3
r
o
ir i
or
i
fi
o
i
i o i
6.4. Installing the unit
r
i i i
prevent vibration and noise.
NOTE
When the installation height of the unit needs to be increased, do not
use stands to only support the corners.
A
A
A
A
A
A
≥3-7/8 in. (100 mm)
X
Not allowed
O Allowed
The height of the foundation must be at least 5-7/8 in. (150 mm )
ro
oor
In heavy snowfall areas, this height should be increased, depending
on the installation place and condition.
The unit must be installed on a solid longitudinal foundation (steel
beam frame or concrete) and make sure the base under the unit is
larger than the gray marked area.
Dimensions for above figure
1 Hole for foundation bolt f9/16 in. (15 mm) dia: 4 positions
2 Inner dimension of
2
≤24-7/8 in. (631 mm)
the base
Distance between
3
29 in. (729 mm)
foundation bolt holes
4 Depth of unit
30-3/16 in. (767 mm)
Outer dimension of the
≥30-3/16 in. (767 mm)
5
base
Longitudinal foundation
72T type:
6
dimension
96-168T type:
Distance between
72T type:
7
foundation bolt holes
96-168T type:
o
fici
ro
o
A
A
A
A
A
A
A
1
6
7
36-11/16 in. (932 mm)
48-7/8 in. (1242 mm)
30-3/16 in. (766 mm)
42-3/8 in. (1076 mm)
3P362438-5N English
Publicité
