Publicité
Caution:
Always make sure that the machine is unplugged from power source
and the main switch is on "O" when the machine is not in use and
before inserting or removing parts.
Attention:
Consult a qualified electrician if in doubt as to connect machine to
power source. Unplug power cord when machine is not in use.
The appliance must be used with the foot controller 4C-316B (110-
120V area)/ 4C-316C (220-240V area) manufactured by
MATSUSHITA ELECTRIC (TAIWAN) CO., LTD.
All manuals and user guides at all-guides.com
1
2
Foot control regulates the
sewing speed.
Polarized attachment plug
Conductor
intended to be
grounded
3
Publicité
